3/4" Round Red PC2 Sealed LED Marker/Clearance Light – 1 SMD, Dual .180" Male Bullet Connectors & Grommet

Compact Red Lighting. Sealed Construction. Pre-Terminated Connections.

Add compact red vehicle marking illumination with Kaper II's 3/4" Round Red PC2 Sealed LED Marker/Clearance Light.

Featuring one surface-mounted device (SMD) LED, this compact round light is identified with a PC2 designation and intended for compatible marker and clearance lighting applications.

Its sealed assembly includes 10-inch electrical leads terminated with two .180-inch male bullet connectors, along with a mounting grommet for compatible installation.

The pre-terminated leads distinguish this model from Kaper II's bare-wire marker light configurations and provide a convenient electrical connection option for compatible vehicle wiring systems.

Its compact 3/4-inch round configuration makes this light an option for qualifying trailers, commercial trucks, RVs, and specialty vehicles requiring red marker or clearance illumination.

Key Features & Benefits

• 3/4" Round Design: Compact circular lighting configuration for compatible mounting locations.

• Red Illumination: Intended for qualifying red marker and clearance lighting applications.

• PC2 Designation: Identified with a PC2 marker/clearance lighting classification.

• 1 SMD LED: Features one surface-mounted LED.

• Sealed Construction: Identified as a sealed lighting assembly.

• 10" Electrical Leads: Provides ten inches of wiring for compatible installations.

• Two .180" Male Bullet Connectors: Pre-terminated leads for connection to compatible female bullet terminals.

• Reduced Field Termination: Eliminates the need to install male bullet terminals on the supplied leads when the mating harness is compatible.

• Mounting Grommet Included: Supplies the mounting accessory for compatible installation.

• LED Technology: Uses solid-state lighting rather than a traditional incandescent filament.

Product Specifications

Vehicle Applications

Trailer Marker and Clearance Lighting

A compact lighting option for compatible cargo trailers, utility trailers, equipment trailers, and specialty trailers requiring red vehicle marking illumination.

Commercial Truck Lighting

May be suitable for qualifying commercial truck marker and clearance light installations.

RV and Motorhome Lighting

Can be considered for compatible RV and motorhome applications requiring compact red LED lighting.

Work Trucks and Specialty Vehicles

An option for compatible service trucks, utility vehicles, and specialty vehicle lighting projects.

OEM Vehicle Manufacturing

The combination of compact sealed lighting, pre-terminated bullet connectors, and an included mounting grommet may be useful for manufacturers selecting lighting components for production installations.

These are potential applications. Exact fitment, connector compatibility, emitted-light requirements, and regulatory suitability must be verified for the intended vehicle and mounting position.

Compact 3/4-Inch Round Design

The 3/4-inch round configuration provides a compact lighting format for installations where a larger marker light may not be appropriate.

Customers should verify the actual outside diameter, required mounting opening, and installation depth before ordering.

Red LED Illumination

This model provides red illumination for qualifying vehicle marker and clearance lighting applications.

Red lighting is commonly used in designated rear vehicle marking positions, subject to applicable requirements.

The supplied description does not establish the exact approved mounting position or lens color.

Customers should verify the required emitted color and regulatory classification for their intended installation.

Single SMD LED Configuration

This light features one SMD LED.

SMD stands for Surface-Mounted Device, referring to an electronic component mounted directly onto a circuit board.

The single-LED configuration distinguishes this product from Kaper II marker lights featuring multiple LEDs.

The supplied specifications do not establish measured brightness, wattage, current draw, or expected service life.

PC2 Marker/Clearance Designation

This product is identified with a PC2 designation and described as a marker/clearance light.

PC2 is associated with combination clearance and side-marker lighting applications, making it an important technical characteristic for vehicle manufacturers and replacement-part buyers.

The product description alone does not establish the exact certified functions, applicable installation positions, or compliance with a particular SAE or DOT requirement.

Customers should verify the product's approval markings and technical documentation for the intended application.

Sealed Light Assembly

The light is identified as having sealed construction.

This is an important product characteristic for vehicle lighting installations where exposure to environmental conditions may be a consideration.

However, sealed construction should not be interpreted as a specific waterproof, submersible, or IP-rated performance claim without supporting documentation.

10-Inch Electrical Leads

The product includes 10-inch electrical leads.

This provides a defined wiring length for installers planning the connection between the light and a compatible vehicle wiring harness.

The supplied description does not identify the wire gauge, colors, or individual electrical functions.

Dual .180-Inch Male Bullet Connectors

One of this model's defining features is its pair of .180-inch male bullet terminals.

Unlike bare-wire configurations, the leads are supplied with male bullet connectors already installed.

This allows the light to connect to compatible female bullet terminals without requiring installers to attach male terminals to the light's leads.

For OEM production and fleet maintenance, pre-terminated leads can help simplify component selection and reduce field termination steps when the mating harness is compatible.

Connector size, terminal style, electrical requirements, and polarity should be verified before installation.

The supplied description does not establish a waterproof connector system or a specific mating harness.

Mounting Grommet Included

The included mounting grommet provides a mounting accessory for compatible installations.

This helps simplify component selection by supplying the light and its mounting grommet together.

The required mounting-hole diameter and compatible panel thickness should be verified before installation.

Installation Recommendations

Before installation, verify:

• Actual light and grommet dimensions.

• Required mounting-hole diameter.

• Mounting surface and panel thickness.

• Operating voltage.

• Wire polarity and electrical functions.

• Compatibility with .180-inch male bullet terminals.

• Appropriate female bullet connectors or mating harness.

• Wiring route and required lead length.

• Vehicle mounting position.

• Applicable marker and clearance lighting regulations.

Follow Kaper II's installation instructions and use electrical connections suitable for the vehicle's operating environment.

Confirm applicable SAE/DOT certifications for the intended lighting position.

Important: The supplied designation confirms a 3/4-inch round red sealed marker/clearance light, PC2 designation, one SMD LED, 10-inch leads, two .180-inch male bullet connectors, and an included grommet. Lens color, wire gauge, sheathing, voltage, exact dimensions, environmental rating, and regulatory certifications require verification.