3/4" Round Amber Sealed LED Marker/Clearance Light – PC2, 1 SMD, 10" Bare Leads, Grommet Included

Compact Size. Sealed Construction. PC2 Marker/Clearance Design.

Add compact amber vehicle marking illumination with Kaper II's 3/4" Round Amber Sealed LED Marker/Clearance Light.

Featuring one surface-mounted device (SMD) LED, this compact round light is identified with a PC2 classification and is intended for compatible marker and clearance lighting applications.

Its sealed assembly includes 10-inch 18 AWG bare-wire leads and a mounting grommet, combining a small lighting format with clearly specified wiring and an included mounting accessory.

The compact 3/4-inch configuration makes this light an option for qualifying trailers, commercial trucks, RVs, and specialty vehicles where a small amber marker/clearance light is required.

Key Features & Benefits

• 3/4" Round Design: Compact circular light configuration for compatible mounting locations.

• Amber Marker/Clearance Lighting: Intended for qualifying vehicle marking applications.

• PC2 Designation: Identified for PC2 lighting applications, subject to verification of applicable certification.

• 1 SMD LED: Features one surface-mounted LED for amber illumination.

• Sealed Construction: Identified as a sealed lighting assembly.

• 10" Bare-Wire Leads: Includes 10-inch electrical leads for compatible wiring connections.

• 18 AWG Wiring: Specified conductor gauge helps installers identify connection requirements.

• Mounting Grommet Included: Supplies the grommet for compatible mounting.

• LED Technology: Uses solid-state lighting rather than a traditional incandescent filament.

• Compact Installation Format: Suitable for consideration where space is limited.

Product Specifications

Vehicle Applications

Trailer Marker and Clearance Lighting

A compact lighting option for compatible cargo trailers, utility trailers, equipment trailers, and specialty trailers requiring amber vehicle marking illumination.

Commercial Truck Lighting

May be suitable for qualifying commercial truck marker and clearance light installations.

RV and Motorhome Lighting

Can be considered for compatible RV and motorhome applications requiring a compact amber LED light.

Work Trucks and Specialty Vehicles

An option for compatible service trucks, utility vehicles, and specialty vehicle lighting projects.

Fleet Maintenance

Provides a replacement lighting option for vehicles using compatible 3/4-inch round amber marker/clearance lights.

These are potential application categories. Exact fitment, lighting function, and regulatory suitability must be verified for the intended vehicle and mounting position.

Compact 3/4-Inch Round Design

The 3/4-inch round configuration is one of this light's defining features.

Its compact nominal size provides an option for applications where a larger marker or clearance light may not be appropriate.

Customers should verify the actual light diameter, mounting opening, grommet dimensions, and installation depth before ordering.

Single SMD LED Configuration

This marker/clearance light features one SMD LED.

SMD stands for Surface-Mounted Device, referring to an electronic component mounted directly onto a circuit board.

The single-LED configuration distinguishes this product from Kaper II marker lights featuring three, nine, or thirteen LEDs.

The supplied specifications do not establish measured brightness, wattage, current draw, or expected service life.

PC2 Marker/Clearance Designation

This product is identified with a PC2 designation and described as a marker/clearance light.

PC2 is associated with combination clearance and side-marker lighting applications, making it an important technical characteristic for customers selecting vehicle lighting components.

However, the product title alone does not establish the exact certified functions, applicable installation positions, or compliance with a particular SAE or DOT requirement.

Customers should verify the product's approval markings and technical documentation for the intended application.

Sealed Light Assembly

The light is identified as having sealed construction.

This is an important product characteristic for vehicle lighting installations where exposure to environmental conditions may be a consideration.

However, sealed construction should not be interpreted as a specific waterproof, submersible, or IP-rated performance claim without supporting documentation.

10-Inch Bare-Wire Leads

The product includes 10-inch bare-wire electrical leads.

Bare-wire termination allows the leads to be connected using an appropriate wiring method for the intended installation.

The supplied description does not identify the number of wires, their colors, or their electrical functions.

Customers should verify wiring requirements before connecting the light.

18 AWG Wire

The electrical leads are specified as 18 AWG.

AWG stands for American Wire Gauge, a standardized system used to identify conductor size.

Providing the wire gauge helps installers select compatible electrical connections and plan the installation.

The specified wire gauge does not independently establish the light's operating voltage or current draw.

Mounting Grommet Included

The included grommet supplies a mounting accessory for compatible installations.

This helps customers identify the required mounting component without assuming that a separate grommet purchase is necessary.

The exact mounting-hole size and compatible panel thickness should be verified before installation.

Installation Recommendations

Before installation, verify:

• Actual light and grommet dimensions.

• Required mounting-hole diameter.

• Mounting surface and panel thickness.

• Operating voltage.

• Number and function of electrical leads.

• Wire polarity and grounding requirements.

• Suitable connections for 18 AWG bare-wire leads.

• Vehicle mounting position.

• Applicable marker and clearance lighting regulations.

Follow Kaper II's installation instructions and use electrical connections suitable for the vehicle's operating environment.

Confirm applicable SAE/DOT certifications for the intended lighting position.

Important: The supplied designation confirms a 3/4-inch round amber sealed marker/clearance light, PC2 designation, one SMD LED, 10-inch 18 AWG bare-wire leads, and an included grommet. Exact dimensions, voltage, wire count, environmental rating, and regulatory certifications require verification.