3/4" Round Amber PC2 Sealed LED Marker/Clearance Light – 1 SMD, 20" Bare Leads & Grommet

Compact Lighting. Sealed Construction. Extended Wiring Reach.

Add compact amber vehicle marking illumination with Kaper II's 3/4" Round Amber PC2 Sealed LED Marker/Clearance Light.

Featuring one surface-mounted device (SMD) LED, this compact round light is identified with a PC2 designation and intended for compatible marker and clearance lighting applications.

Its sealed assembly includes 20-inch bare-wire electrical leads and a mounting grommet, combining compact lighting with additional wiring length for compatible installations.

The 3/4-inch round configuration makes this light an option for qualifying trailers, commercial trucks, RVs, and specialty vehicles requiring a small amber marker or clearance light.

Key Features & Benefits

• 3/4" Round Design: Compact circular configuration for compatible mounting locations.

• Amber Marker/Clearance Lighting: Intended for qualifying vehicle marking applications.

• PC2 Designation: Identified for PC2 lighting applications, subject to verification of applicable certification.

• 1 SMD LED: Features one surface-mounted LED.

• Sealed Construction: Identified as a sealed lighting assembly.

• 20" Electrical Leads: Provides 20 inches of wiring for compatible installations.

• Bare-Wire Termination: Allows connection using an appropriate electrical connection method.

• Mounting Grommet Included: Supplies the mounting accessory for compatible installation.

• LED Technology: Uses solid-state lighting rather than a traditional incandescent filament.

• Extended Wiring Reach: Offers additional lead length compared with the previously cataloged 10-inch PC2 variants.

Product Specifications

Vehicle Applications

Trailer Marker and Clearance Lighting

A compact lighting option for compatible cargo trailers, utility trailers, equipment trailers, and specialty trailers requiring amber vehicle marking illumination.

Commercial Truck Lighting

May be suitable for qualifying commercial truck marker and clearance lighting installations.

RV and Motorhome Lighting

Can be considered for compatible RV and motorhome applications requiring compact amber LED lighting.

Work Trucks and Specialty Vehicles

An option for compatible service trucks, utility vehicles, and specialty vehicle lighting projects.

OEM Vehicle Manufacturing

The combination of compact sealed lighting, 20-inch electrical leads, and an included mounting grommet may be useful for manufacturers selecting lighting components for production installations.

These are potential applications. Exact fitment and regulatory suitability must be verified for the intended vehicle and mounting position.

Compact 3/4-Inch Round Design

The 3/4-inch round configuration provides a compact lighting format for installations where a larger marker light may not be appropriate.

Customers should verify the actual outside diameter, required mounting opening, and installation depth before ordering.

Single SMD LED Configuration

This light features one SMD LED.

SMD stands for Surface-Mounted Device, referring to an electronic component mounted directly onto a circuit board.

The single-LED configuration distinguishes this model from Kaper II marker lights featuring three, nine, or thirteen LEDs.

The supplied specifications do not establish measured brightness, wattage, current draw, or expected service life.

PC2 Marker/Clearance Designation

This product is identified with a PC2 designation and described as a marker/clearance light.

PC2 is associated with combination clearance and side-marker lighting applications, making it an important technical characteristic for vehicle manufacturers and replacement-part buyers.

The product description alone does not establish the exact certified functions, applicable installation positions, or compliance with a particular SAE or DOT requirement.

Customers should verify the product's approval markings and technical documentation for the intended application.

Sealed Light Assembly

The light is identified as having sealed construction.

This is an important product characteristic for vehicle lighting installations where exposure to environmental conditions may be a consideration.

However, sealed construction should not be interpreted as a specific waterproof, submersible, or IP-rated performance claim without supporting documentation.

Extended 20-Inch Bare-Wire Leads

One of this model's defining features is its 20-inch electrical lead length.

Compared with the previously cataloged 10-inch PC2 variants, the additional wiring length provides more flexibility when planning connections to a compatible vehicle wiring system.

This may be useful when the connection point is located farther from the light's mounting position.

The bare-wire termination allows the leads to be connected using an appropriate electrical connection method.

The supplied description does not identify the wire gauge, number of wires, colors, or individual electrical functions.

Mounting Grommet Included

The included mounting grommet provides a mounting accessory for compatible installations.

This helps simplify component selection by supplying the light and its mounting grommet together.

The required mounting-hole diameter and compatible panel thickness should be verified before installation.

Installation Recommendations

Before installation, verify:

• Actual light and grommet dimensions.

• Required mounting-hole diameter.

• Mounting surface and panel thickness.

• Operating voltage.

• Number and function of electrical leads.

• Wire gauge, polarity, and grounding requirements.

• Suitable electrical connections for bare-wire leads.

• Wiring route and required lead length.

• Vehicle mounting position.

• Applicable marker and clearance lighting regulations.

Follow Kaper II's installation instructions and use electrical connections suitable for the vehicle's operating environment.

Confirm applicable SAE/DOT certifications for the intended lighting position.

Important: The supplied designation confirms a 3/4-inch round amber sealed marker/clearance light, PC2 designation, one SMD LED, 20-inch bare-wire leads, and an included grommet. Wire gauge, sheathing, voltage, exact dimensions, environmental rating, and regulatory certifications require verification.