3/4" Round Amber PC2 Sealed LED Marker/Clearance Light – Clear Lens, Sheathed Bullet Leads & Grommet

Clear Lens. Amber Illumination. Protected Wiring.

Combine compact vehicle lighting with a clean, clear-lens appearance using Kaper II's 3/4" Round Amber PC2 Sealed LED Marker/Clearance Light.

Featuring one surface-mounted device (SMD) LED, this compact round light provides amber illumination through a clear lens and is identified with a PC2 marker/clearance designation.

The sealed light assembly includes 10-inch electrical leads with protective sheathing and .180-inch male bullet terminals, along with a mounting grommet for compatible installations.

This configuration combines three useful features: clear-lens styling, additional protection around the wiring, and pre-terminated electrical leads.

It is a practical lighting option for qualifying trailers, commercial trucks, RVs, and specialty vehicles requiring compact amber marker or clearance illumination.

Key Features & Benefits

• 3/4" Round Design: Compact circular lighting configuration for compatible mounting locations.

• Clear Lens: Provides a clear-lens appearance when the light is not illuminated.

• Amber LED Illumination: Produces amber light when activated.

• PC2 Designation: Identified for PC2 marker/clearance lighting applications.

• 1 SMD LED: Features one surface-mounted LED.

• Sealed Construction: Identified as a sealed lighting assembly.

• 10" Electrical Leads: Provides a defined lead length for installation planning.

• Protective Wire Sheathing: Adds a protective covering around the lead assembly.

• .180" Male Bullet Terminals: Pre-terminated electrical connections for compatible female bullet terminals.

• Mounting Grommet Included: Supplies a mounting accessory for compatible installation.

• LED Technology: Uses solid-state lighting rather than a traditional incandescent filament.

Product Specifications

Vehicle Applications

Trailer Marker and Clearance Lighting

A compact lighting option for compatible cargo trailers, utility trailers, equipment trailers, and specialty trailers requiring amber vehicle marking illumination.

Commercial Truck Lighting

May be suitable for qualifying commercial truck marker and clearance lighting installations.

RV and Motorhome Lighting

Can be considered for compatible RV and motorhome applications requiring compact amber LED lighting.

Work Trucks and Specialty Vehicles

An option for compatible service trucks, utility vehicles, and specialty vehicle lighting projects.

OEM Vehicle Manufacturing

The combination of compact sealed lighting, clear-lens styling, sheathed wiring, and pre-terminated bullet connectors may be useful for manufacturers specifying components for compatible production installations.

These are potential application categories. Exact fitment, electrical compatibility, and regulatory suitability must be verified for the intended vehicle and mounting position.

Clear Lens with Amber Illumination

One of this model's defining characteristics is its clear lens.

Unlike traditional amber-lens marker lights, this product uses a clear lens while producing amber illumination when activated.

This creates a different appearance when the vehicle's lights are turned off.

For customers selecting vehicle lighting, it is important to distinguish between lens color and emitted light color.

• Lens Color: Clear

• Illumination Color: Amber

The required emitted color and applicable lighting classification should be verified for the intended installation.

Compact 3/4-Inch Round Design

The 3/4-inch round configuration provides a compact lighting format for applications where a larger marker light may not be appropriate.

Customers should verify the actual outside diameter, required mounting opening, and installation depth before ordering.

Single SMD LED Configuration

This light features one SMD LED.

SMD stands for Surface-Mounted Device, referring to an electronic component mounted directly onto a circuit board.

The single-LED configuration distinguishes this product from Kaper II marker lights featuring multiple LEDs.

The supplied specifications do not establish measured brightness, wattage, current draw, or expected service life.

PC2 Marker/Clearance Designation

This product is identified with a PC2 designation and described as a marker/clearance light.

PC2 is associated with combination clearance and side-marker lighting applications, making it an important technical characteristic for vehicle manufacturers and replacement-part buyers.

The product description alone does not establish the exact certified functions, applicable installation positions, or compliance with a particular SAE or DOT requirement.

Customers should verify the product's approval markings and technical documentation for the intended application.

Sealed Light Assembly

The light is identified as having sealed construction.

This is an important characteristic for vehicle lighting installations where exposure to environmental conditions may be a consideration.

However, sealed construction should not be interpreted as a specific waterproof, submersible, or IP-rated performance claim without supporting documentation.

10-Inch Electrical Leads

The light includes 10-inch electrical leads.

This provides a defined wiring length for installers planning connections to a compatible vehicle wiring harness.

The supplied description does not identify the wire gauge, colors, or individual electrical functions.

Protective Wire Sheathing

A distinguishing feature of this model is its protective wire sheath.

The sheath provides an additional covering around the electrical lead assembly, helping shield the enclosed wiring from incidental contact and handling during installation.

This can be useful in compatible trailer, truck, and RV wiring layouts where electrical leads are routed through or behind vehicle panels.

The supplied description does not establish the sheath material, coverage length, abrasion rating, or temperature rating.

Protective sheathing should not be treated as a substitute for proper wire routing, strain relief, or suitable electrical connections.

.180-Inch Male Bullet Connectors

The electrical leads are supplied with .180-inch male bullet terminals.

Unlike bare-wire configurations, this model provides pre-terminated leads for connection to compatible female bullet terminals.

For OEM production and fleet maintenance, pre-terminated leads can help reduce field termination steps when the mating wiring harness is compatible.

Customers should verify the terminal size, mating connector design, polarity, and electrical requirements before installation.

The exact number of bullet terminals should be confirmed from the manufacturer's technical documentation.

Mounting Grommet Included

The included mounting grommet provides a mounting accessory for compatible installations.

This helps simplify component selection by supplying the light and its mounting grommet together.

The required mounting-hole diameter and compatible panel thickness should be verified before installation.

Installation Recommendations

Before installation, verify:

• Actual light and grommet dimensions.

• Required mounting-hole diameter.

• Mounting surface and panel thickness.

• Operating voltage.

• Wire polarity and electrical functions.

• Compatibility with .180-inch male bullet terminals.

• Appropriate mating female terminals or harness.

• Protective sheath routing and clearance.

• Wiring route and required lead length.

• Vehicle mounting position.

• Applicable marker and clearance lighting regulations.

Follow Kaper II's installation instructions and use electrical connections suitable for the vehicle's operating environment.

Confirm applicable SAE/DOT certifications for the intended lighting position.

Important: The supplied designation confirms a 3/4-inch round amber sealed marker/clearance light, PC2 designation, clear lens, one SMD LED, 10-inch sheathed leads, .180-inch male bullet terminals, and an included grommet. Terminal count, wire gauge, operating voltage, exact dimensions, environmental rating, and regulatory certifications require verification.