2.5" Round Red 3-LED Surface-Mount Marker Light – 2-Wire

Three LED Diodes. Surface-Mount Design. Compact Red Marker Lighting.

Enhance your vehicle's marker lighting with Kaper II's 2.5" Round Red LED Marker Light.

Featuring three LED diodes in a compact circular configuration, this light is designed to provide red marker illumination for compatible vehicle lighting applications.

Its surface-mount construction and two-wire electrical connection make it an option for qualifying trailers, commercial trucks, RVs, and specialty vehicles requiring this specific lighting configuration.

Whether replacing an existing marker light, maintaining a commercial fleet, or completing a new vehicle lighting installation, this Kaper II marker light offers a compact LED lighting solution.

Key Features & Benefits

• 2.5" Round Design: Compact circular lighting format for compatible mounting locations.

• 3 LED Diodes: Features three LEDs for red marker illumination.

• Red Marker Lighting: Intended for qualifying vehicle marking applications.

• Surface-Mount Design: Identified for surface-mounted installation.

• 2-Wire Connection: Features two electrical wires for connection to a compatible vehicle lighting circuit.

• LED Technology: Uses solid-state lighting rather than traditional incandescent filaments.

• Replacement Lighting Option: Suitable for consideration when replacing compatible existing marker lights.

• Commercial Vehicle Applications: May be used in qualifying truck, trailer, RV, and specialty vehicle lighting installations.

• Compact Lighting Format: Provides a small round design for applications requiring this configuration.

Product Specifications

Vehicle Applications

Trailer Marker Lighting

A compact lighting option for compatible cargo trailers, utility trailers, equipment trailers, and other trailer applications requiring red marker illumination.

Commercial Truck Lighting

May be suitable for qualifying commercial truck marker light installations.

RV and Motorhome Lighting

Can be considered for compatible RV and motorhome marker lighting applications.

Work Trucks and Specialty Vehicles

An option for qualifying utility trucks, service vehicles, and specialty vehicle lighting projects.

Fleet Maintenance

Provides a replacement lighting option for compatible vehicle fleets using 2.5-inch round red marker lights.

These are potential application categories. Exact vehicle fitment and regulatory suitability must be verified for the intended installation.

2.5-Inch Round Design

The 2.5-inch round configuration provides a compact lighting format.

This nominal size is an important specification when replacing an existing marker light or planning a new installation.

Customers should verify the actual outside diameter, installation depth, and mounting requirements before ordering.

Three-Diode LED Configuration

This marker light features three LED diodes.

The three-diode arrangement distinguishes this product from other marker lights featuring nine LEDs or different diode configurations.

LED technology provides illumination without the filament used in traditional incandescent bulbs.

The supplied specifications do not establish measured brightness, wattage, current draw, or expected service life.

Red Marker Illumination

This product is identified as a red marker light.

Red marker lights are commonly used in qualifying rear and rear-side vehicle marking positions, depending on vehicle type and applicable regulations.

Customers should verify the light's approved function and mounting position before installation.

The supplied description does not independently establish clearance-light certification or DOT/SAE approval.

Surface-Mount Design

The surface-mount configuration is one of this product's primary distinguishing features.

Surface-mounted lighting assemblies are installed against a compatible mounting surface rather than necessarily requiring the same recessed opening as a grommet-mounted light.

The exact mounting-hole pattern, fastener requirements, and installation method have not been supplied.

Customers should confirm these details before installation.

Two-Wire Electrical Connection

This marker light features a two-wire electrical connection.

The two-wire configuration is an important characteristic when selecting a replacement light or matching an existing vehicle wiring system.

However, the supplied description does not identify the individual wire functions, polarity, or operating voltage.

Customers should follow the manufacturer's wiring instructions rather than assuming a particular wire-color convention.

LED Marker Light Replacement

This light can be considered for replacing compatible existing marker lights or completing new vehicle lighting installations.

When replacing an incandescent light with an LED model, verify the vehicle's electrical requirements and connection compatibility.

The supplied description does not establish whether mounting screws, connectors, or other installation accessories are included.

Installation Recommendations

Before installation, verify:

• Nominal and actual light dimensions.

• Surface-mounting requirements.

• Mounting-hole spacing and fastener compatibility.

• Operating voltage.

• Two-wire electrical configuration.

• Wiring polarity and grounding requirements.

• Vehicle mounting position.

• Environmental protection requirements.

• Applicable marker lighting regulations.

Follow Kaper II's installation instructions and protect electrical connections against moisture, abrasion, and vibration.

Confirm applicable DOT/SAE approvals for the intended vehicle and lighting position.

Important: The supplied product designation confirms a 2.5-inch round red LED marker light featuring three diodes, surface mounting, and a two-wire connection. Electrical ratings, mounting hardware, lens color, environmental protection, and regulatory certifications require verification.